Circle K Steel Buildings, LLC

• Trim - Standard stock trim is available. Custom trim can also be ordered.
• Trim - Fitted Ridge

• 3" Cee
• 4" Cee
• 6" Cee
• 8" Cee
• 4" Open Cee (Receiver Channel)
• 6" Open Cee (Receiver Channel)
• 8" Open Cee (Receiver Channel)
• Custom Order - Custom order Cees, Zees, and Eave struts are available on request.

• Insulation and Accessories - 3" reinforced vinyl backed low itch insulation with R10 value is stocked.
• Tape - Double Sided Tape 180'
• Tape - Patch Tape

Steel Truss - In sizes of 20, 24, 30 & 40 with 3:12 pitch. Built from 1 1/2 x 3 Rect Tubing 14ga with dove tail cut ends (not plated)

Plates - A variety of plates are available in stock, for all needs from truss building post caps to bolted building rafter and connection plates. Custom punched plates are also available

Skylight Panels - We carry both clear and white skylight panels. The panels are made from poly carbon plastic that is impact and shatter resistant, making them a better alternative to older fiberglass style.

• 6"x6" Weld Plates - Plates have welded studs on bottom of plate to promote a solid setting in the concrete slab.
• Weld Plates - We also carry plates with punched holes for prepoured slabs.

• tubing sizes are 3"x3" 14g & 11g
• tubing sizes are 4"x4" 14g & 11g
• tubing sizes are 1.25"x1.25"x14g
• tubing sizes are 1.5"x1.5"x14g
• tubing sizes are 2"x2"x14g
• Custom sizes available

Stock I-Beam sizes

• I-Beam size W8x10
• I-Beam size W10x12
• I-Beam size W12x14

Stock Structural Steel

• Structural Steel Angle Iron 2x2x1/8"
• Structural Steel Angle Iron 2x3x3/16"
• Multiple sizes of Flat Strap
• 1/2" Rebar
• 3/8" Rebar
• Custom Order - Structural Steel can be ordered in many sizes.

• R-Panel with PBR - Commercial Style Panel with 12" Rib Center and 1 1/4" tall ribs. Also, with a Purlin Bearing Rib.
• Tuff Rib with Siphoning Rib - Ag-Panel with 9" Rib Center and 3/4" tall ribs.

• Standard Trim
• Custom trim

• Drillers 1 1/4"
• Laps 3/4"
• Wood Binder 1 1/2"
• Wood Binder 2"
• Stitch Screws 7/8"

• Armor flect Insulation and reflectant - Armor Flect is considered both an insulator with an R6 value and a reflectant. With its double foil facing it reflects the suns heat rays out, conserving household energy and with its fiberglass inner lining and reinforced vinyl backing it provides an aggressive step in an energy efficient home.
• 7/8" Hat Channel - To be compared with lathe boards when replacing a roof
• Snow/Ice Guards - Used to slow or impede falling ice and snow on roof tops
• Roof Jacks (Master Flash) - Ranging in sizes from 1/4" to 18" also including retro fit roof jacks
• Closures-Tuff Rib - Inside and Outside closure
• Closures-R-Panel - Inside and Outside closure
• Closures-Xpanded Closure - for both tuff rib and R-Panel
• Sealant-Standard Tacky Tape - 3/8" and 3/4" width available
• Sealant-Clear Acrylic Caulking
• Sealant Caulking - Durable colored sealant is available in all colors that we carry